Federal VHSS Series, Инструкция по установке и эксплуатации

Страница: 15 / 29

E3981 VHSS 15
Make the heater connections from the back of the shelf into the receptacle of the vertical frame of
the unit. Remove the receptacle cap and push the heater cord (the heater cord comes out of the
left side of the shelf) into the nearest heater receptacle. The cord will only insert in one direction
as shown below.
Once power is applied to the display case you will be able to check if the cord connection has
been adequately made.
Tip: If the rear of the unit is accessible, it may be easier to remove the rear panel and make this
connection from the back of the case.