E3981 VHSS
9
LEVEL CASE USING THESE SURFACES
Adjust the (4) outside leg levelers as needed to level the case in each direction.
NOTE: If necessary, use a wood or plastic shim under each leg leveler to avoid scratching the
tile floor.
Sealing Unit to The Floor
After the unit is positioned and the leg levelers are turned out, the unit needs to be sealed to the
floor for NSF approved installation.
5.4
PRIOR TO INITIAL USE
Unit must be cleaned as indicated in the “WEEKLY CLEANING” section of this manual before
initial use.
Содержание VHSS Series
Страница 25: ...E3981 VHSS 25 15 WIRING DIAGRAMS...
Страница 28: ...E3981 VHSS 28 17 2 REAR SLIDING DOORS...