Federal VHSS Series, Инструкция по установке и эксплуатации

Страница: 14 / 29

E3981 VHSS 14
(8) SHELVING INSTALLATION AND REMOVAL
8.1 SHELF BRACKETS AND SUPPORTS
Follow the
instructions shown in the diagram below to install shelf brackets. Follow the “LEVEL”
path if you want shelves to have no tilt or follow the “SLANTED” path if you want shelves with tilt.
Ensure brackets are well seated and face the proper direction.
Lay back of shelf across both brackets. Slide it to the rear and then lay the front of the shelf down.
Check that the retaining tab of the shelf brackets protrudes through the slot in the shelf.