Page 18 of 39
(10)
SECURITY NIGHT COVER (OPTION)
LOCK HANDLE
(SHOWN IN LOCK POSITION)
LOCK HANDLE
(SHOWN IN LOCK POSITION)
SECURITY NIGHT COVER
GRAB HANDLE
GRAB HANDLE
LOCK HANDLE CATCH
LOCK HANDLE CATCH
FRONT CLEAR DEFLECTOR
"U" RETAINER CLIP
"U" RETAINER CLIP
"U" RETAINER CLIP ON CENTER
(ON SOME MODELS)
REMOVAL:
9.
Unlock the lock handles and turn handles vertical to disengage from lock handle catches.
10.
Grab the front grab handles and lift the cover straight up out of the case opening.
INSTALATION:
1.
Turn the lock handle so the latch handle is vertical to the top of the case.
2.
Holding the grab handles place the bottom flange of the security night cover inside the “U” retainer clips located
on each side of case opening behind the front clear deflector. There also may be a “U” retainer clip in the center
of the case that must also engage the security night cover flange.
3.
Set the top flange of the security cover down against the top glass handle.
4.
Turn the lock handles so they engage the lock handle catches and use the key to lock them in place.
IMPORTANT: Cleaning the Acrylic plastic security night cover require special care to prevent hazing of material.
Lightly dust (not wipe) the surface with clean soft cloth. Then the surface can be wiped carefully with a soft, wet cloth or
chamois. The cloth or chamois must be kept free of grit by frequently rinsing in clean water. Grease and oil can be
removed with kerosene. Do not use window cleaners or kitchen scouring compounds. DO NOT use solvents such as
Acetone, Benzene, Carbon Tetrachloride, and Lacquer Thinners. A spray wax such as Pledge or Maguire’s polish can be
applied and wiped with a clean soft cloth. The wax tends to fill in and hide small scratches.
