ECSS E3335
- 16 -
Adjusting the set point
The set point is what determines how cold the display case will hold food and beverage. To
adjust the set point press and hold the
button approx. 5 seconds until the display begins to
flash a number. Then press the use the
button to scroll number up (colder) or press the
button to scroll number lower (warmer). There are nine (9) available set points numbers,
the higher the number of the set point, the colder the display case will run, with setting “9”
being the coldest and setting “1” being the warmest. Once you have chosen your desired
setting press the
button
again to confirm your choice.
Entering manual defrost mode
In order to initiate a manual defrost press and hold the
button approx. 5 seconds. The
control will read “dEF” while the button is being held. The defrost is initiated when the defrost
mode indicator
illuminates on the display. The control display will then return to reading
the case temperature. When the defrost mode indicator
turns off the defrost is complete and
the compressor will turn back on illuminating the compressor run indicator
.
Error codes
It is possible for error codes to be displayed on the control screen. In the event of a malfunction
an alarm will sound and the alarm indicator
will be displayed on the display. An error code
or codes will flash intermittently on the display. If there are multiple codes, the display will
continuously cycle through them. The following photo shows error code “E0” as an example.
