ECSS E3335
- 8 -
SEALING THE UNIT TO FLOOR
After the unit is positioned and the leg levelers are turned out, the unit needs to be
sealed to the floor for NSF approved installation.
Base Panel Removal
Panels must be in place when operating the case.
FRONT NOSE
PANEL
LEFT SIDE PANEL
PANEL BOTTOM RETAINING
SLOTS (TYPICAL)
SIDE PANEL HOOK
1/4 TURN PANEL
RETAINER SCREWS
(TYPICAL)
RIGHT SIDE PANEL
Typical Panels Removal
1. Loosen the (2) ¼ turn retainer screws from top of panel.
(The screws will stay on the panel even after they are detached from base)
2. Tilt the top of the panel away from the base and pull up on panel to allow the
side panel hooks to pull out of the side panel slots.
3. Set the panel in safe place to prevent damage.
4. Reinstall panels in the reverse order.
DANGER: Electric shock hazard. Do not operate unit with panels removed.
