4. Insert a small screwdriver into each release
tab opening. The two openings are marked on the
PC board. Push down the release tabs, and slide the
mechanism off of the mounting tabs. Lift the mechanism
out of the base.
5. Replace the mechanism after servicing by
aligning the narrower, front tabs with the matching
features in the base. Slide the assembly into place.
Ensure that the rear tabs snap into their matching
holders. Downward pressure may be needed.
290A5575
CATCH TAB
PUSH DOWN TO
RELEASE TAB
PRY TO SLIDE MECHANISM
Figure 8.
-6-
