HAMPTONBAY.com
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
2
TURNING THE SWITCH “AUTO”
□
Put the switch, located under the solar panel,
to the AUTO position.
3
ADJUSTING THE DIMMER SWITCH AND
SWITCHING COLORS
□
Using the dimmer switch (B) on the back
of the solar top housing (A) allows you to
adjust the focus of the Smart Focus™
Solar Spot Light.
5
□
Push the solar spot light asembly
into the ground.
Safety Information
Please note the following important safety notes:
1. The ground stake is sharp. Handle with care to avoid injury.
2. Clean the solar panel with a damp cloth. Do not use any chemicals or abrasives.
3. Keep the solar panel free of dirt and debris.
4. Do not dispose of battery in fire. Dispose of batteries in accordance all local, state and
federal regulations.
WARNING:
Do not use hammer. If ground is
hard, use water to soften.
DANGER:
Ground stake is sharp. Handle with
care.
IMPORTANT:
Dispose of batteries in accordance
with all local, state and federal regulations.
PACKAGE CONTENTS
Use and Care Guide
Solar Powered LED
Color-Changing Spotlight
Item #xxxx xxx xxx
Model #10238
Part
Description
Quantity
A
Solar Top Housing
1
B
Dimmer
1
C
Screw
1
1
ATTACHING THE SOLAR TOP HOUSING
TO THE GROUND STAKE
□
Align the ground stake (D)
to the screw (C) on the
solar top housing (A).
CAUTION:
The ground stake
is sharp. Be careful when
handling to avoid injury.
□
Attach the ground stake (D)
to the solar top housing (A)
by tightening the screw (C)
using a clockwise motion.
Choosing the Right Location
Your solar spot light should be installed in an area that gets DIRECT SUNLIGHT.
Your solar spot light will produce more hours of operation when installed in an
area which is free from cover, shade, or shadowing.
□
Located under the solar panel, the Color Control
Button (E) allows you to manually cycle through
the colored LED options. You may also use the
use the remote (F) that is included.
INSERTING THE SOLAR SPOT LIGHT ASSEMBLY
INTO THE GROUND
D
E
F
Ground Stake
Color Contron Button
Remote
1
1
1
NOTE:
Do not press hard on top
of solar top housing (A). This can
damage the solar light.
NOTE:
Do not use a hammer.
If the ground is hard, use water
to soften.
NOTE:
The remote (F)
functions best
within 5 meters
and at an angle
of 45°.
