Valor
®
Light Bar Hook-On Mounting Kit Manual
3
Valor Hook-On Mounting Kit
Federal Signal
www.fedsig.com
Figure 1 Service Kit mounting foot installation
5/16 -18 NUTS (10)
5/16 LOCKWASHER (10)
LH MOUNTING FOOT
LIGHTBAR BASE
(LEFT SIDE, INVERTED)
LH HOOK ATTACH BRACKET
290A6440
3.
Use a nut retainer and two #10 Type B pan Torx screws to trap the 5/16-18 flange nut on the backside of
the hook-attach bracket. See Figure 2.
Figure 2 Hook attach bracket installation
#10 PAN TORX SCREW (4)
290A6441
LH HOOK ATTACH BRACKET
LH MOUNTING FOOT
5/16-18 FLANGE NUT (2)
NUT RETAINER (2)
LIGHTBAR BASE
4.
Repeat steps 2 and 3 with the other mounting foot assembly.
5.
To continue with the installation, see "Preparing the Valor for Hook-Mounting" on page 5.
