47
Applications
Description, Specifications, and Installation Manual
audio A and B.
Quiet Test
The Federal Signal Commander System can manually or automatically activate Quiet
Test for verification of system operation. Quiet Test uses a 20 kHz tone to test tone
generators and optional amplifiers. To configure the quiet test, see the Federal Signal
Commander Manual. To access the results of the Quiet Test, use the Federal Signal
Commander System.
AC/DC Power System
The UVRI-B includes a 13.5 Vdc power supply. The DC voltage is used to power
external radio equipment or broadband modems. The DC voltage also chargers a battery
for operation during power loss. The battery is also used to power the optional amplifier.
Applications
Two-Way Radio Controlled System
The UVRI-B can be used as a two-way radio controlled extension of a Federal Signal
outdoor warning system. The ability to replicate the pre-recorded messages/tones and
live PA allows indoor recipients to receive the same alerts indoor as well as outdoor. The
UVRI-B can be used to replace Radio Informers with two-way supervised and monitored
capabilities. The UVRI-B can also be equipped with a 100 W amplifier to drive local
speakers for wide-area notification. Applications include waste water treatment facilities,
campus, military, fire house, and commercial applications.
Fire Panel Interface
The UVRI-B is designed to interface with a UL2572 fire panel for control, monitoring,
and activation of a Mass Notification System. The UVRI-B can be used in military,
industrial, and campus environments where interfacing Federal Signal outdoor warning
into a fire panel is required. The UVRI-B provides the supervision between the UL2572
fire panel and the outdoor notification system. All messages and live PA are passed from
the UVRI-B into the fire panel for complete site notification.
Fiber-connected Facility
Upgraded industrial and commercial locations have been running fiber throughout their
facility to enable IP connectivity. IP connectivity allows cameras, sensors, access control
and alerting systems to be easily installed across the enterprise. With multi-site locations
and interconnected facilities, the ability to tie all these systems together is simple and
easy to do. Security can be controlled and managed from a centralized location. Alerting
and notification systems can be managed across locations and an alert in one location
can trigger alerts anywhere within the network. The UVRI-B and the Intelligent product
family are all IP-enabled to allow a seamless and efficient alert system to be deployed.
