45
Operations
Description, Specifications, and Installation Manual
Operations
Manual Activation
If configured, use the manual activation switches to activate siren functions. Buttons are
located on the Control Board.
Figure 11 UVRI-B Activation Buttons
Table 29 Manual Activation Buttons on Control Board
Function Switch Function
S2
Code # 1 Activation Switch
S3
Code # 5 Activation Switch
S4
Code # 6 Activation Switch
S5
Code # 2 Activation Switch
S6
Code # 7 Activation Switch
S7
Code # 3 Activation Switch
S8
Stop/Reset Switch
S9
Code # 4 Activation Switch
NOTE
: At any time during a sounding function, push the RESET button to cause the unit
to halt all output immediately.
Local Public Address
With the microphone (part number X-SM1-FS1), the operator has the ability to locally
activate live PA.
To activate live PA:
1. Enter the PA mode by pressing the push-to-talk (PTT) button on the microphone. The
PA LED is lit anytime the PTT button on the microphone is pressed.
2. Set the local PA volume level by adjusting the MIC LEVEL knob located directly
above the J1 local MIC jack.
NOTE
: Local PA overrides ALL siren functions activated either remotely or locally.
NOTE
: Verify operation of Local PA for potential feedback of broadcasts into the local
microphone. Use of local PA with microphone and local cabinet speaker may cause
feedback. Verify proper operation when using.
