3
Federal Signal
signaling.fedsig.com
Mounting the G-LED Beacon
ATTACH THE BEACON SECURELY: To prevent injury, this
apparatus must be securely attached to the mounting
surface in accordance with the installation instructions.
Use installer-supplied fasteners suitable for the
mounting surface.
The mounting method and the installer-supplied mounting
hardware depend on which of the two G-LED models you
are installing.
Mounting the Surface-Mount Ex d Beacon
Mount the beacon to a flat surface using the four 8.5 mm
mounting holes. Use installer-supplied fasteners suitable
for the surface to which the device will be mounted.
Figure 2 Front view of Ex d beacon
105.9 mm
(4.17 in)
105.9 mm (4.17 in)
Ø
105.9 mm (5.27 in)
4X COUNTER-BORED
HOLES TO FIT M8
SOCKET-HEAD
CAP SCREWS
Figure 3 Side view of Ex d beacon
132.6 mm
(5.22 in)
34.9 mm
(1.38 in)
2X M20 GLAND ENTRIES
190.6 mm (7.50 in)
Figure 4 Side view of Ex d beacon (High Profile
Lens Version)
Mounting the Ex de Surface-Mount Beacon
Mount the beacon to a flat surface using the six 8.5 mm
mounting holes. Use installer-supplied fasteners suitable
for the surface to which the device will be mounted.
Figure 5 Front view of Ex de surface mount
4X COUNTER-BORED
HOLES TO FIT M8
SOCKET-HEAD
CAP SCREWS
105.9 mm
(4.17 in)
23.2 mm
(0.91 in)
2X Ø8.5 mm
103.2 mm
(4.06 in)
122.6 mm
(4.83 in)
3X M20
GLAND
ENTRIES
