- 66 -
INF-TN1FSH-E
4.4.9.4. Total SW
Description
This is a function of providing contact output when the total value reaches the set value.
Set the total SW when selecting “F: TOTAL SW” or “R: TOTAL SW” in status output setting.
•
F: Total SW: Total SW value in forward direction
•
R: Total SW: Total SW value in reverse direction
(Setting range: 0 to 9999999999.999)
Note: Set the total preset value in a state where the total mode is set to stop.
Total
Set value
ON
OFF
Status output
Operation
(example)
When setting total switch setting in forward direction to 5000 m
3
Key operation
Description
Display
FUNC TOTAL
Display “TOTAL MODE”
TOTAL MODE
TOTAL STOP
"
or
#
Select “F: TOTAL SW”
F: TOTAL SW
0.000 m
3
ENTER 5 0 0 0 ENTER
Enter numeric value enter mode, enter
“5000” using ten keys, and press ENTER.
F: TOTAL SW
5000.000 m
3
ESC
Return to “TOTAL MODE”
TOTAL MODE
TOTAL STOP
ENTER
"
or
#
ENTER
Enter select/enter mode, select “TOTAL
RESET,” and press ENTER.
TOTAL MODE
TOTAL RESET
ESC
Display the measurement, reflecting the
setting.
(Measurement display screen)
