FDP EX-CP4L, Руководство по установке, Страница: 41 / 91

Page 41 of 91
Rev. 4.20
7.3.3 Points removal (options)
In this menu different options to remove the points can be selected:
“
SELECTED POINT
”: to remove one only point;
“
SELECTED ZONE
”: to remove all the points placed in a zone;
“
SELECTED LOOP
”: to remove all the points belonging to a loop.
Use the four arrows to set oneself on the line with show the type of address
assignment the user wants to select and confirm with “
Sel.
”. Type in
“
Canc
” to return to the “
Point menu
”.
7.3.4 Loop selection
Whatever the previous selection may be, the belonging loop of the point or
the zone must be selected.
Select the “
Loop
” to programme and confirm with “
Sel.
”, use the four
arrows to set oneself on the line that shows the loop the user wants to
programme and select and confirm with “
Sel.
”. Type in “
Canc
” to return to
the “
Point menu
”.
7.3.5 Point address selection
Should the user select to remove a single point, type in the point address to
remove. Through the numerical keyboard it is possible to select the address
of the point.
Confirm the removal selection with “
Ok
” the control panel begins the
research and removes the selected point. Select “
Canc
” to return to the
“
Point menu
”.
7.3.6 Zone address selection
Should the user select to remove a zone of a loop, type in the zone address
to remove. Through the numerical keyboard it is possible to select the
address of the zone.
Confirm the removal selection with “
Ok
” the control panel begins the
research and removes the points of the selected zone. Select “
Canc
” to
return to the “
Point menu
”.
Point addr. select.
ADDRESS: 001
Ok . Canc
Points removal
•SELECTED POINT
SELECTED ZONE
SELECTED LOOP
Sel. Canc
Loop selection
•LOOP 1
LOOP 2
LOOP 3
LOOP 4
Sel. Canc
Zone address select.
ADDRESS: 01
Ok . Canc