FLY-DREAM 8 WWW.FD-RC.COM
4.4 Mixing
Press ENTER button and gets into “Mixing” interface,screen display as:
This menu provides a choice of three mixes, as follows:
FLAPERON MIX (Channels 1-6)
Adds flap function to dual aileron servo setup.
Moving the aileron stick to the right causes right
aileron to go up, left aileron down. Moving
Channel 6 switch causes both to go down (flap).
Flap action is adjustable. Right servo connects
to CH1, left servo to CH6.
V-TAIL MIX (Channels 2 - 4)
Used for V tail aircraft. Mixes elevator and
rudder inputs for pitch and yaw control. Left
control surface servo connects to CH2, right to
CH4.
ELEVON MIX (Channels 1 - 2)
Used for delta wing aircraft and others requiring
elevon control. Mixes aileron and elevator inputs
for roll and pitch control. Left elevon servo
connects to CH1, right servo to CH2.
Press ENTER to open the Mixing interface screen display and use UP or DOWN to select from
among the mixes, as shown below (only one mix can be selected at a time)
：
The Elevon mix (1 - 2) and the V-tail mix (2 - 4) are either on or off and are not adjustable.
The Flaperon mix (1 - 6) can be varied. To adjust to ratio of flap function to aileron, press EXIT
while 1 – 6 is on screen. By default, the ratio is set at 0% (i.e., no flap action). Using UP and
DOWN, the ratio can be varied between -100% and +100%, allowing the flap action to be set to
an appropriate amount in the correct direction. After adjusting, press EXIT to save the flap ratio
setting.
Press UP or
DOWN
