FLY-DREAM 10 WWW.FD-RC.COM
4.6 Bind
Press ENTER to open the Bind interface screen:
Press UP or DOWN to put the transmitter into bind mode, as indicated by the dashes moving
across the screen. This causes the transmitter to send information about its ID code.
To bind the IS-6R receiver, hold the button under the “V3 thumb” symbol while applying power.
The red receiver LED will light. Release the button immediately. The red LED will flash 6 times to
indicate bind success. Turn off the receiver.
Press EXIT three times to return the transmitter to normal working state. Turn on the receiver
and it should respond normally.
Note: Once the receiver is bound, it will initialize automatically. Since binding clears all
failsafe information, after binding it is necessary to reset the failsafe (see section 7).
5 Special Features Menu
To open the Special Features Menu, press and hold ENTER while turning on the transmitter.
This enables setting of the Timer and Transmitter Power functions.
5.1 Timer
For the timer setting interface, press the ENTER button. The screen will display the model
number and the timer setting in minutes. The screen will show something like the following:
Press ENTER
for Timer setting
Press EXIT
for Power setting
Press ENTER
Press
UP
or
DOWN
Press UP or
DOWN
