FLY-DREAM 12 WWW.FD-RC.COM
6.1 Stick Mode
Press ENTER to open the Stick Mode screen. There are four possible transmitter stick modes:
below.
Modes 1 and 3 have throttle (no centering) on the right stick and elevator (spring centered) on
the left. Modes 2 and 4 have throttle on the left and elevator on the right.
The F6TB transmitter has a unique mechanical switch on the back of the transmitter to make
mode change quick and easy. In “Mode 1” position it configures the sticks for Modes 1 and 3.
Sliding the switch to “Mode 2” configures throttle and elevator for Modes 2 and 4.
To set the transmitter mode, make sure the Mode Change switch is in the correct position. Then
press UP or DOWN to change the Stick Mode setting on screen.
When finished, press the EXIT button to save the setting and return to “Mode choices” interface.
6.2 Country Selection
To open the Country screen, press EXIT while in the Mode Choice interface.
The Country screen is needed because France only allows a portion of the 2.4 GHZ band to be
used for radio control purposes. The choice is:
“CU - 0”, the international general frequency range.
“CU - F”, France frequency range.
Choose International, unless the transmitter is to be used in France.
Press ENTER to save the setting and return to the “Mode choices” main interface.
Press UP or DOWN
Press UP or DOWN
Switch to MODE1
position
Switch to MODE2
position
Press UP or DOWN
