FCS Sentinel 2, Руководство пользователя

Страница: 40 / 77

40
Example 2:
Setup of the interface for
“Flow”.
Note: The Flow input is required by
Sentinel 2 (and also PressView) to be
mapped to “channel 2”.
Clicking the cog button for channel “2” gives
details of the source of measurements that
will be used for the “channel 2” memory
area.
It should be modified if required.
The Flow input for Sentinel 2 PRV control is required to be a volt-free pulse input. This
could be one of the following:
•
Flow Bi (for a Bidirectional Flow meter), as in this example or
•
Flow Uni (for a Unidirectional Flow meter)
The “Input Sensor” drop -down selection box is used to choose the electrical interface for
the channel 2 logging memory area.
Here we have selected “Flow Bi”, which will work with a bi -directional flow meter.
The “Sensor Type” drop -down selection box
starts the configuration of how numerical
measurements from this interface will be
interpreted.
The Flow interface should be interpreted as
a reading of “ Flow ”.
Selecting the above determines what units
of measure are available for “Flow”.