FCS Sentinel 2, Руководство пользователя, Страница: 11 / 77

11
2.3.3 Loading Sentinel 2 settings into IDT
A progress bar will show across the top of the page. When completed, an information
box will appear
stating ‘Device Read Success’. Click “OK” to clear the box.
The IDT-PC program has now read the unit’s program (settings) in the “current program”
memory area. This copy can be edited.
The unit itself is not updated with any of the program changes unless the user later
saves the settings stored in IDT back to the Sentinel 2 Control unit by
clicking on
the ”Setup Device” button in IDT.
Some buttons in IDT will however issue commands to Sentinel that can change its
operation immediately; others are to control operations of the IDT program.
Click ‘Read Device’.