FCAR F3SN USER MANUAL
30
5.3.3 Clear Trouble Code
For the clearance of trouble code that recorded by
automotive electronic control system self-diagnosis.
After troubleshooting, use automobile fault
diagnostic computer to clear fault information in
random access memory ROM of vehicle computer.
Note: During fault diagnosis, first record or print
out the trouble codes for the reference of
maintenance and then clear. Trouble code that
cannot be cleared is the existing actual fault, users
should find vehicle fault and repair it at first, then
re-clear the trouble code.
5.3.4 Read Data Stream
Select
【
Read Data Stream
】
in the menu to check
the controller, sensor and executor of vehicle control
system and data that meet the operation requirements
of the engine.
Users can browse the next item or data on the next
page by dragging the upward and downward progress
bar on the right of the menu. Users also can prioritize
the data that need to check. For instance, click the
item
【
Vehicle RPM
】
with the touch pen, and
【
Vehicle RPM
】
will become green and move to the
first row and the data of this item will stay on the first
row all the time. Users need to click it again until the
green color has gone if it is wanted to be canceled.
