FCAR F3SN USER MANUAL
13
connector into vehicle diagnostic socket to finish connection. Not all cars are equipped with OBD-II
connectors, thus, connection is subject to the actual connectors.
3.1.3 Start Up
Use any one of the four power supply methods, press
in the bottom left of main unit screen. The
main unit will start, and then enter into the running
state.
3.1.4 Shut Down
Click touch screen and back to desktop after using,
press
in the bottom left of main unit screen
to shut down.
Notes: When startup or shutdown, the button
operation time is generally 1 ~ 2mins, long press
the button
may cause key failure.
3.2
Startup Interface Menu
Introduction
3.2.1 Startup Interface
Connect the power supply, press the power switch key,
FCAR product identification firstly appears on the
screen, then
【
Please click the screen if it needs
calibration.
】
appears at the top of the starting up
progress bar.
Notes: If users need to adjust touch screen, please
at this time click on anywhere of the screen with
the touch pen to enter adjustment mode. During
adjustment, users must use touch pen to adjust.
If there is no need to adjust the touch screen,
system will automatically enter desktop in 2s.
