FCAR F3SN USER MANUAL
25
4.2 Diagnostic Socket Connection
4.2.1 Connection of OBD-II connector
Choose the proper connectors according to the
diagnostic connectors of the to-be-detected vehicles.
If the connector of the to-be-detected vehicles is
standard OBD-II, users need to separately connect
two ends of the main test cable with the main unit and
OBD-II connector, fasten them with bolts and put
diagnostic connector into the diagnostic sockets on
one side of the vehicle.
4.2.2 Connection of Non-OBD-II
Connector
At first, users should confirm whether the connector
of to-be-detected vehicle has the F3 decoder. When
connecting, users should first connect the connector
that is exclusive to F3 decoder to standard OBD-II
connector, and then connect standard OBD-II
connector with the main testing cable and the main
unit of the decoder.
