FBII XL-2T, Руководство пользователя, Страница: 9 / 30

- 9 -
Account #
Telephone #
Turning The System On
IS THE SYSTEM READY?
You can turn the burglar portion of your security system ON and OFF. Before
you can turn the system ON, it must be “ready.” If you have a protected door
open, or someone is moving in view of a motion detector, the system will not
display “ READY .”
The system is ready if the READY light is ON or if the display shows:
SYSTEM READY
WHEN SYSTEM IS NOT READY
If the system is not ready to be armed, the READY light will be OFF and the
zone lights will show which zone or zones are not ready. The following
conditions will be indicated by the zone lights or described on the display:
Fast Blink ...................................Alarm
Slow Blink/Low Intensity .........Bypass
Slow Pulse ..................................Trouble
Solid ON .....................................Not Ready
Example: If the READY light is not lit and the Zone 1 light is solid ON , an
alarm sensor on Zone 1 is faulted. This might mean that a door is open or
someone is walking in view of a motion sensor. Check all sensors on Zone 1 and
resolve the problem. When all sensors are restored, the READY light will come
ON and the zone light will go out. In this example, the display shows:
SYSTEM NOT READY
Determine which zone or zones are not ready, resolve the problem, and turn the
system ON normally. If the problem cannot be resolved, you may bypass the
zone that is not ready. Bypassing should only be done if the problem on the zone
cannot be resolved, OR if you intentionally wish to leave the zone OFF.
For example, you would leave the zone OFF if you plan to keep the window open
for ventilation. Zones that are bypassed are not protected when the
system is ON. See Bypass on the following page for a description of the
procedure.
and
NOT RDY ZONE 1
FRONT DOOR