FBII XL-2T, Руководство пользователя, Страница: 12 / 30

- 12 -
Turning The System OFF
When you turn the system OFF, you turn OFF only the burglar portion of your
system; any smoke or heat detectors and panic keys will remain ON. You must
enter through a designated entry door and turn OFF the system within the
time allowed. You can have different amounts of time for different entry points.
See your system reference sheet for the times established for your system.
To turn your system OFF:
Enter your 4-digit user code.
If no alarms have taken place, the ON/OFF light (labeled
ARM ) will go OFF, or
the display will show:
SYSTEM READY
If alarms occurred when the system was ON, or if a trouble condition exists, the
zone LED's will indicate it, as follows:
Fast Blink ...................................Alarm
Slow Blink/Low Intensity .........Bypass
Slow Pulse ..................................Trouble
Solid ON .....................................Not Ready
or the LCD will display:
ALARM ZONE 1
FRONT DOOR
Burglary alarms will sound a steady tone at the keypad(s), and fire alarms will
generate a pulsing sound.
IMPORTANT:
If an intrusion has taken place while you were away, do not enter
until the location has been checked. Call for help from a neighbor's house and
wait there for the police.
After you have turned the system OFF with your user code, the LCD keypads
will display this message:
ALM MEM ZONE 1
FRONT DOOR
To clear the display of alarm or trouble conditions and silence the audible alert:
Enter your 4-digit user code
again.