FBII XL-2T, Руководство пользователя, Страница: 14 / 30

- 14 -
Miscellaneous Commands
SEND HELP ALERTS
Your system can be programmed for 3 separate keypad Send Help alerts that
would send an emergency signal to your Central Station. See the System
Reference sheet to see which have been programmed for your system.
DURESS
Your system can be programmed to send an emergency signal to the Central
Station if you are forced to enter the premises. If you choose to include this
feature, User Code 15 is dedicated to this function, and must only be used under
a duress circumstance.
QUICK ON (QUICK ARMING)
If programmed by your installer, Quick ON, or Quick Arming, allows you to
turn the system ON to the AWAY mode without entering a user code.
NOTE:
Turning your system OFF always requires a valid user code.
Press [#] [1].
QUICK FORCED ON
If programmed by your installer, Quick Forced ON allows you to turn the
burglar portion of your alarm system ON to the AWAY mode, bypassing all
zones that are not ready.
Press [#] [2].
NOTE:
A valid user code is still required to turn the system OFF.
NOTE:
This feature is disabled on UL installations.
QUICK BYPASS
If you have Quick Bypass programmed for your system, you will not have to use
your user code to bypass zones. The Quick Bypass procedure is:
BYPASS ZONE (1 - 7)
NOTE:
Bypassed zones are not protected when the system is turned ON. After
the bypass command has been accepted, the keypad sounds one long beep. The
zone light of the bypassed zone(s) will slowly blink, or the display will show:
BYPASSED: ZONE 1
FRONT DOOR
NOTE:
Temporary users (i.e. baby sitters, housekeepers, etc.) should not be
shown the Bypass procedure.