FBII XL-2T, Руководство пользователя, Страница: 21 / 30

- 21 -
Glossary
(cont)
EXIT DELAY:
The period of time allowed between turning the
system on and leaving through a designated exit/entry door before
the system will register an alarm condition. This is determined at
the time of installation.
INTERIOR ZONE:
An interior zone is a group of points that protect
the interior of your premises. You may want to turn the perimeter
portion of your system on while leaving the interior zones OFF to
allow you to open interior doors and pass interior motion detectors
without causing an alarm.
KEYPAD:
A keypad is your link into your system. It displays alarm
and trouble messages, shows faulted zones and allows you to turn
the system ON or OFF by using the buttons. Your system will have
one or more keypads.
ON/OFF:
These terms refer to the burglary portion of your security
system. There are several levels of operation that allow you to
protect part of your premises while you remain inside. Fire sensors
and other emergency and environmental features are always active
and ready; they are not affected in any way by turning the burglary
portion of your security system ON or OFF. Other terms used are
"armed" (system is on) and "disarmed" (system is OFF). See
ON-INSTANT, ON-STAY, and STAY.
ON/OFF INDICATOR:
Red light in the upper portion of the keypad
labeled "Armed ." When lit, some part of the burglar alarm system is
ON; when not lit, the burglary portion of the system is OFF.
ON-STAY:
A system setting that turns ON the perimeter protection
of the building but allows movement throughout the interior.
PANIC BUTTON:
A push button that allows you to signal the
Central Station that you need immediate assistance. Your system
has programmable Keypad Send Help Alerts that can also serve as
Panic buttons.
PERIMETER ZONE:
A perimeter zone is a group of points that
protect the exterior of your premises. Your outside doors and
windows would be programmed as a perimeter zone.