FBI FM, Инструкция по эксплуатации и техническому обслуживанию

Страница: 3 / 12

3
1. GENERAL INFORMATION
This operator’s manual is an integral and essential part of the product and is supplied together
with the oven. It is suggested to read carefully the manual and observe any stated indication in
order to use the equipment correctly. Please take care of this manual for any further
consultation.
Typographic convention
Danger signal which indicates to observe carefully the instructions
for avoiding possible damages to the equipment or accident.
Danger signal which indicated to pay attention as hot surfaces are
present
This manual wants to be an instructions and maintenance guide for Holding Ovens for
Electrodes model FM – FM1 – FM2, which are made by F.B.I. Srl – Via Isonzo,26 – 20050 San
Damiano di Brugherio (MI), Italy.
•
It must be used and read by the operators, maintenance employees and by the staff and
purchaser for what it concerns spare parts.
•
It must be located with care in a known place, protected by dirty and humidity and it must be
always available for consultation by the operators.
•
Read it and give to read carefully to all the operators in all parts before proceeding to install,
to use, or for maintenance or dismantling of the oven and/or equipment.
•
Check always that the operator has understood very well how to proceed for use and the
safety symbols fitted on the oven .
•
Do not damage or remove the labels or the name-plate fitted on the oven.
•
It is possible to prevent accidents if the given instructions are respected.
•
Before connecting the oven be sure that the name-plate data correspond to the electrical
distribution system ones.
•
Do not expose the oven to the inclemency of the weather or install in high humidity
environments, that is bathrooms, etc.
•
In case of emergency, that is fire starting, anomalous noise, overheating, etc. disconnect
immediately the system electrical connection.