FBI FM, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 12

7
5.2. Oven - Heating element replacement
To replace heating element, proceed as follows:
Warning! switch the main supply off
Make sure that the heating element are cool prior to performing maintenance.
•
Remove the protection cover located on the rear of the oven.
•
After removing the electrode tray , disconnect the faulty heating element pulling it out from
the oven front.
•
Fit the new heating element having the same properties and sizes and restore the right
connections
•
Reassemble the bottom cover on the rear of the oven.
•
Place the electrode trays in the oven chamber.
•
Switch on the oven main power switch for few minutes to eliminate any possible humidity
residual on the new heating element. Switch it off and await about 15 minutes before
switching it on again and making the oven on operation. This allows the heating element to
get stable and have a better long-life.
5.3. Extraordinary maintenance
Check periodically the electrical wires, the components and the connections and replace them
when damaged.
In case of any other further problem, please contact your usual dealer or directly F.B.I. Srl, who
will help you with right indications for a good use.
Please inform us of any problem you may have. Plus, please let us know any suggestion you
believe useful to improve the equipment. It is welcome.
6. SAFETY
6.1. Accident prevention rules
In order to observe and to prevent the safety of the employees using this oven, users should follow
these standard safety procedures:
1. The users must use the wear safety goggles, shoes, dressing or something else suitable for
the place and the ambient when they are operating.
2. Read carefully the instructions reported on this manual.
3. Check the electrical connections before switching the oven on.
4. Switch the power supply off before disconnecting the pin
5. Attend to all cautions mentioned time by time on this manual.
ALL THE OPERATIONS MUST BE DONE AT THE BEST SAFETY CONDITIONS.