FAZUA RIDE 50 STREET Скачать руководство пользователя страница 13

Страница: 13 / 68

Original instructions | English

►

Obtain information on any relevant national standards relating to

e-bikes and comply with these.

WARNING

Dangers due to unauthorised modifications!

If you carry out unauthorised modifications to the drive system or

to the components, you may cause an explosion, suffer an electric

shock or cause serious injury to yourself or others.

►

Never make any unauthorised modifications or changes to indi-

vidual components of the drive system.

►

Do not perform any unauthorised replacement of the drive system

components.

►

Never open any components of the drive system without authorisa-

tion. The components of the drive system do not require any main-

tenance. Only allow repairs to the drive system to be performed by

authorised specialists.

►

Only allow the components of the drive system to be replaced by

an authorised specialist and with genuine spare parts.

WARNING

Danger due to accidental start-up!

If the drive system is put into operation in inappropriate situations,

this can result in accidents and serious injuries.

►

Remove the DRIVEPACK from the e-bike while transporting or

storing the e-bike, and during all work on the e-bike to avoid the

drive system being started up accidentally.

WARNING

Danger of battery explosion!

The BATTERY may explode if you use inappropriate batteries or do not

handle the rechargeable BATTERY correctly.

►

Only use the genuine BATTERY from FAZUA approved by the e-bike

manufacturer.

►

Under no circumstances use a damaged BATTERY and never

attempt to charge a damaged BATTERY!

Содержание RIDE 50 STREET




































































Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды