FAZUA RIDE 50 STREET Скачать руководство пользователя страница 15

Страница: 15 / 68

Original instructions | English

►

If you come into contact with battery acid, immediately rinse the

affected body part thoroughly under running water.

►

After rinsing, seek advice from a doctor immediately, in particular

on eye contact and/or if the mucous membranes are affected

(e.g. nasal mucous membranes).

WARNING

Health risk due to irritation of the airways!

If the BATTERY is damaged, gases may escape that can result in irri-

tation of the airways.

►

Protect the BATTERY from mechanical impact and any other type

of load.

►

If you notice or suspect that gas is escaping from the BATTERY,

immediately ensure that there is a fresh supply of air and consult

a doctor as soon as possible.

WARNING

Danger of interference with medical equipment!

The magnetic connections of the BATTERY and CHARGER can impair

the function of pacemakers.

►

Keep the BATTERY and the CHARGER away from pacemakers or

persons with pacemakers and make people with pacemakers

aware of the danger.

WARNING

Risk of electric shock!

Improper handling of the CHARGER or an incorrect mains connection

may expose you and others to the risk of electric shock.

►

Only connect the CHARGER to an easily accessible and properly

installed earth contact outlet.

►

Make sure that the mains voltage at the mains connection corre-

sponds to the information on the CHARGER.

►

Only use the CHARGER in dry indoor areas.

►

Keep the CHARGER away from all liquids and humidity.

Содержание RIDE 50 STREET




































































Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды