FAZUA RIDE 50 STREET, Оригинальное руководство пользователя

Страница: 52 / 68

English | Original instructions
52
24.3.1 Attack function
In addition to the “regular” support levels, which you can use permanently*,
the drive system has an additional function: The Attack function allows you to
ride for a short time with an (increased) maximum motor power of 350 watts,
which means that you have even more thrust for a short time.
The duration of the additional thrust provided by the attack function depends on
the situation in which you activate the attack function:
• If you activate the Attack function
from a standing position , you will be
propelled with more thrust for 4 seconds .
• If you activate the Attack function while riding , you will be propelled with more
thrust for 12 seconds .
To activate the Attack function:
→
Press and hold the upper touch sensor [C.1] on the REMOTE for 2 seconds.
The LEDs of the display [C.5] show a special animation during the whole func-
tion time, signalling that the attack function is active.
The attack function is automatically deactivated after the above-mentioned
duration of 4 or 12 seconds or when you stop pedalling (e.g. to brake).
The Attack function cannot be activated if:
• The e-bike reaches a speed of more than 25 km/h.
• You have not selected a support level (The LEDs of the display
[C.5]
on the REMOTE light up white.).
• You have activated the rain mode of the REMOTE.
24.4 Re-starting the drive system
→
Hold down the centre button [C.2] of the REMOTE for 8 seconds to power down
your drive system completely: All LEDs [C.5] / [C.6] extinguish.
If the drive system is ready for switching back on, the status display [C.6] will
flash green or blue**: You can then start your drive system again as normal.
* Depending on the charge level of the battery.
** The colour for the “Ready for use” status is either green or blue, depending on the model.