Fayat DYNAPAC DFP8 Скачать руководство пользователя страница 87

Страница: 87 / 110

17.

Assemble the fuel tank with hexagon nuts (2) and hexagon

screw (1).

18.

Check the fuel system for leaks.

19.

Dispose of fuel and replaced components in an environmen-

tally friendly way.

8.8.5 Replacing the air filter

NOTICE!
Danger of engine damage!

–

Do not start the engine after having removed

the air filter.

Protective equipment:

Working clothes

Safety shoes

Protective gloves

Park the machine safely

Chapter 6.5 ‘Parking the machine

in secured condition’ on page 62

Allow the engine to cool down.

Unscrew wing nut (1) and remove cover (2).

Clean the cover.

Unscrew wing nut (3) and remove filter element (4).

Check the rubber seal (5), replace if necessary.

The rubber seal frequently sticks to the filter

element.

B-834-0038

Fig. 83

Fig. 84

Maintenance – Annually

DFP8

Содержание DYNAPAC DFP8















































































































Результаты поиска

Содержание DYNAPAC DFP8

Отзывы:

Похожие инструкции для DYNAPAC DFP8

Бренды по названию

Популярные бренды

Fayat DYNAPAC DFP8, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание DYNAPAC DFP8

Отзывы:

Похожие инструкции для DYNAPAC DFP8

Бренды по названию

Популярные бренды