Fayat Group DYNAPAC DRP15X, Оригинальная инструкция по эксплуатации

Страница: 78 / 120

8. Separate paper element and foam element.
9.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(protective gloves, protective clothing,
goggles).
Blow the paper element out with dry compressed air (max.
2 bar (29 psi)) from inside to outside by moving the gun up
and down inside the element, until it is free of dust.
10. In case of excessive dirt, replace the paper element.
11. Clean the foam rubber insert in warm soapy water (1), rinse it
and let it dry thoroughly (2).
12. Soak the foam element in clean engine oil (3) and press
excessive oil out (4).
13. Check both elements thoroughly for holes and cracks.
14. Replace if damaged.
15. Pull the foam rubber element over the paper element.
Checking, cleaning the air filter
B-HON-0045
Fig. 74
B-HON-0046
Fig. 75
1 2
3 4
B-HON-0047
Fig. 76
Maintenance – Weekly
DRP15X 78