Fayat Group DYNAPAC DRP15X Скачать руководство пользователя страница 48

Страница: 48 / 120

5.3 Daily maintenance

5.3.1 Checking the engine oil level

NOTICE!
Danger of engine damage!

–

+Use only oil of the permitted specification

Chapter 8.2.1 ‘Engine oil’ on page 71

Protective equipment:

Working clothes

Safety shoes

Protective gloves

Clean the area around the oil dipstick.

Unscrew the dipstick and wipe it clean with a lint-free, clean

cloth.

Insert the dipstick into the oil filler socket, do not screw it in,

but pull it out again to check the oil level.

The oil level must be between the “MIN” and “MAX”

marks.

NOTICE!
Danger of engine damage!

–

Do not overfill with engine oil.

If the oil level is too low, top up oil to the “MAX” mark.

Screw the oil dipstick in.

B-SYM-1068

Fig. 32

MAX

MIN

B-HON-0064

Fig. 33

Checks prior to start up – Daily maintenance

DRP15X

Содержание DYNAPAC DRP15X

























































































































Результаты поиска

Содержание DYNAPAC DRP15X

Отзывы:

Похожие инструкции для DYNAPAC DRP15X

Бренды по названию

Популярные бренды

Fayat Group DYNAPAC DRP15X, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание DYNAPAC DRP15X

Отзывы:

Похожие инструкции для DYNAPAC DRP15X

Бренды по названию

Популярные бренды