Fayat Group DYNAPAC DFP7AX Скачать руководство пользователя страница 80

Страница: 80 / 114

8.6 Weekly

8.6.1 Checking, cleaning the air filter

NOTICE!
Danger of engine damage!

–

Do not start the engine after having removed

the air filter.

–

If necessary, the air filter may be cleaned up to

six times.

–

Cleaning does not make sense if the air filter

element is covered with a sooty deposit.

–

Do not use gasoline or hot fluids to clean the

filter element.

–

After cleaning, the air filter must be inspected

for damage using a torch.

–

Do not continue to use a damaged air filter ele-

ment. If in doubt use a new air filter.

Protective equipment:

Working clothes

Protective gloves

Safety goggles

Park the machine in secured condition

Chapter 6.5

„Parking the machine in secured condition“ on page 64

Allow the engine to cool down.

Unscrew wing nut (1) and remove cover (2).

Clean the cover.

Unscrew wing nut (3) and remove filter element (4).

Check the rubber seal (5), replace if necessary.

The rubber seal frequently sticks to the filter

element.

Removing the air filter

Fig. 57

Maintenance – Weekly

DFP7AX

Содержание DYNAPAC DFP7AX



















































































































Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды

Fayat Group DYNAPAC DFP7AX, Инструкция по эксплуатации

Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды