Fayat Group DYNAPAC DFP7AX Скачать руководство пользователя страница 51

Страница: 51 / 114

5.4 Checking the fuel level, topping up fuel

DANGER!
Danger to life caused by explosive gas-air

mixes!

–

Do not allow gasoline to come into contact with

hot components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and

other sources of ignition.

–

Do not spill any gasoline.

NOTICE!
Danger of engine damage!

–

Monitor the entire refuelling process.

–

Contaminated fuel can cause malfunction or

even damage of the engine. If necessary, fill in

fuel through a screen filter.

–

Use only fuel of the permitted specification

Chapter 8.2.2 „Fuel“ on page 75

Protective equipment:

Working clothes

Protective gloves

Park the machine in secured condition

Chapter 6.5

„Parking the machine in secured condition“ on page 64

Clean the area around the filler opening.

Remove the cap and check the filling level visually.

If necessary, fill in fuel through a funnel with screen filter.

Close the cap.

Fig. 28

Checks prior to start up – Checking the fuel level, topping up fuel

DFP7AX

Содержание DYNAPAC DFP7AX



















































































































Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды

Fayat Group DYNAPAC DFP7AX, Инструкция по эксплуатации

Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды