Fayat Group DYNAPAC DFP7AX Скачать руководство пользователя страница 50

Страница: 50 / 114

5.3 Checking the engine oil level

NOTICE!
Danger of engine damage!

–

+Use only oil of the permitted specification

Chapter 8.2.1 „Engine oil“ on page 75

Protective equipment:

Working clothes

Protective gloves

Clean the area around the oil dipstick (1).

Unscrew the dipstick and wipe it clean with a lint-free, clean

cloth.

Insert the dipstick into the oil filler socket, do not screw it in,

but pull it out again to check the oil level.

The oil level must be between the “MIN” and “MAX”

marks.

NOTICE!
Danger of engine damage!

–

Do not fill in too much engine oil.

If the oil level is too low, top up oil to the “MAX” mark.

Screw the oil dipstick in.

Fig. 27

Checks prior to start up – Checking the engine oil level

DFP7AX

Содержание DYNAPAC DFP7AX



















































































































Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды

Fayat Group DYNAPAC DFP7AX, Инструкция по эксплуатации

Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды