Fayat Group DYNAPAC DFP7AX Скачать руководство пользователя страница 100

Страница: 100 / 114

Depending on weather conditions these conservation measures

will protect the machine for approx. 6 to 12 months.

Park the machine in secured condition

Chapter 6.5

„Parking the machine in secured condition“ on page 64

Allow the engine to cool down for at least 30 minutes.

Clean the machine thoroughly.

Change the engine oil

Chapter 8.7.1 „Changing the engine

oil“ on page 83

Use fuel stabilizer or drain off fuel completely.

Mix fresh fuel with fuel stabilizer (follow the instructions of the

manufacturer).

Empty the fuel tank and fill it with the prepared fuel mix.

Start the engine and run the machine for approx. 10 minutes

in the open.

Park the machine in secured condition.

Close the fuel valve.

Disassemble the drain plug (3) and the seal (4) from the car-

burettor and catch running out fuel.

Disassemble filter bowl (2) and O-ring (1).

Open the fuel valve and catch running out fuel.

Close the fuel valve.

Install the drain plug with the seal on the carburettor.

Assemble the filter bowl with the O-ring.

Dispose of fuel environmentally.

Using fuel stabilizer

Emptying the fuel tank.

Fig. 99

Fig. 100

Maintenance – As required

DFP7AX

100

Содержание DYNAPAC DFP7AX



















































































































Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды

Fayat Group DYNAPAC DFP7AX, Инструкция по эксплуатации

Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды