Fayat Group DYNAPAC DFP7AX Скачать руководство пользователя страница 64

Страница: 64 / 114

6.5 Parking the machine in secured condition

Components can be very hot during or immediately after operation.

WARNING!
Danger of burning on hot components!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Avoid touching hot components.

Protective equipment:

Hearing protection

Working clothes

Protective gloves

Safety shoes

Park the machine on level and firm ground.

Set the throttle lever to “MIN” position (idle speed).

NOTICE!
Danger of engine damage!

–

Do not shut down the engine all of a

sudden from full load speed, but let it idle

for about two minutes.

Turn the starter switch to “OFF” position.

The engine is shut down.

Fig. 44

Fig. 45

Operation – Parking the machine in secured condition

DFP7AX

Содержание DYNAPAC DFP7AX



















































































































Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды

Fayat Group DYNAPAC DFP7AX, Инструкция по эксплуатации

Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды