FASTORA DAS-315SA Disk Array
88
Volume Name:
The default volume name will always appear as Volume Set. #. You can
rename the volume set name providing it does not exceed the 15 characters
limit.
Capacity:
The maximum volume size is default in the first setting. Enter the appropriate
volume size to fit your application.
Raid Level:
Set the RAID level for the Volume Set. Highlight
Raid Level
and press
Enter
.
The available RAID levels for the current Volume Set are displayed. Select a
RAID level and press
Enter
to confirm.
Strip Size:
This parameter sets the size of the stripe written to each disk in a RAID 0, 1,
0+1, 5 or 6 logical drive. You can set the stripe size to 4 KB, 8 KB, 16 KB, 32
KB, 64 KB, or 128 KB.
A larger stripe size produces better-read performance, especially if your
computer does mostly sequential reads. However, if you are sure that your
computer does random reads more often, select a small stripe size
Note: RAID level 3 can’t modify the stripe size.
Cache Mode:
The RAID subsystem supports Write-Through Cache and Write-Back Cache.
Tag Queuing:
The Enabled option is useful for enhancing overall system performance under
multitasking operating systems. The Command Tag (Drive Channel) function
controls the
SCSI command tag queuing support for each drive channel. This function
should normally remain enabled. Disable this function only when using older
