FASTERHOLT FM4400, Руководство пользователя и каталог запасных частей

Страница: 25 / 96

25
MENU 5 MENU 5
SIGNAL GSM signal strength.
NETWORK GSM network.
A: First number on "SMS" list.
B: Second number on "SMS" list.
See GSM chapter for details.
START: START:
The turbine can only start if the magnet is aligned with the end stop sensor (or end stop sensors). The turbine can only start if the magnet is aligned with the end stop sensor (or end stop sensors). See menu 3 for control of the See menu 3 for control of the STOP SENSOR STOP SENSOR . .
Press the Press the START START key to turn on the water. The regulator valve for bypass around the turbine then closes. (Turbine starts). If the end stop sensor key to turn on the water. The regulator valve for bypass around the turbine then closes. (Turbine starts). If the end stop sensor
is not in place, only the main valve can be opened, which then immediately closes again. Used to relieve pressure before removing charge hose is not in place, only the main valve can be opened, which then immediately closes again. Used to relieve pressure before removing charge hose
from hydrant. from hydrant.
DEFERRAL OF START TIME DEFERRAL OF START TIME
First press the STOP STOP key to shut off the water. Then press the MENU MENU key 3 times and PROG PROG 3 times. The start time can be set using the "+" and
"-" keys. Finally, select pre- and post-irrigation. To exit, press MENU. MENU. Info: The clock can only be set forwards.
STOP: STOP:
When the magnet is removed from the end stop sensor, the turbine stops and the main valve shuts off the water (turns on the water at nega- When the magnet is removed from the end stop sensor, the turbine stops and the main valve shuts off the water (turns on the water at nega-
tive pressure). tive pressure). If post-irrigation is selected, rewinding stops when the magnet is removed from the sensor. When the post-irrigation time has If post-irrigation is selected, rewinding stops when the magnet is removed from the sensor. When the post-irrigation time has
elapsed, the main valve closes. When the elapsed, the main valve closes. When the STOP STOP key is pressed, the turbine stops immediately and the main valve shuts off the water, regard- key is pressed, the turbine stops immediately and the main valve shuts off the water, regard-
less of whether post-irrigation is selected. less of whether post-irrigation is selected.
SUPERVISION: SUPERVISION:
Program Rain has Program Rain has a built-in supervision system. The supervision system will be activated if for any reason the machine has water in the same a built-in supervision system. The supervision system will be activated if for any reason the machine has water in the same
location for longer than a specified time. This time is factory-set to 20 minutes. If the time is set to 0, there is no supervision. (See constants location for longer than a specified time. This time is factory-set to 20 minutes. If the time is set to 0, there is no supervision. (See constants
on page 17 for setting the supervision time.) If speed supervision less than 50 % of pre-selection is required, select speed supervision together on page 17 for setting the supervision time.) If speed supervision less than 50 % of pre-selection is required, select speed supervision together
with the above time. with the above time.
SPEED: SPEED:
The speed is set using the "+" and "-" keys. The speed is set using the "+" and "-" keys. First count up in steps of 0.1 m/h. After 10 steps, count up in steps of 1 m/h. The speed can be First count up in steps of 0.1 m/h. After 10 steps, count up in steps of 1 m/h. The speed can be
changed at any time during irrigation. If the speed changes during irrigation, the dose and time for the remaining irrigation will be calculated changed at any time during irrigation. If the speed changes during irrigation, the dose and time for the remaining irrigation will be calculated
immediately based on the new speed. immediately based on the new speed.