Fastbind Elite, Руководство пользователя, Страница: 11 / 131

REV. d5 Elite Multilang
© 2004.12 Maping Co
www.maping.com
1.1
a) b)
6.1.1
Before you begin, ensure that
• Τ
here is glue in the applicator reservoir (Fastbind Hot-Melt)
•
Machine has warmed up at least 20 min
•
Η ard cover nipping plate is attached (marked with “H”)
• Τ
he turntable is in normal position
• Τ
he hardcover paper guide is attached (H- model)
PREPARATIONS:
a. Fold the hardcover in your hands to pre-form ‘folding lines’ down
the spine against the spine board.
b. Add tacky lining sheets as the fi rst and last page of the paper block
with the silicone release paper outwards. Jog the complete block
and align them against the paper guide.
Release the clamp by pulling the clamp handle down and
towards you. Insert the cover between the clamp and turntable.
It will slip in easily if you lift the turntable slightly using the
clamping handle. Place the cover so that the front page faces
turntable.
6.1. LOADING COVER AND PAPERS
Section 6
BINDING A HARDCOVER BOOK
Check List & Preparations
Binding procedure
BINDING A HARDCOVER BOOK
a,b ) Press the cover spine against positioning deck.
Spine width
(mm)
Paper block
thickness (mm)
No. of sheets
(pages)
8 4 ± 1,0 35 - 55
10 6,5 ± 1,0 55 - 75
12 8,5 ± 1,0 75 - 95
14 10,5 ± 1,0 95 - 115
16 12,5 ± 1,0 115 - 135
18 14,5 ± 1,0 135 - 155
20 16,5 ± 1,0 155 - 175
NO. OF PAGES FOR DIFFERENT HARDCOVERS
Table applies to FASTBIND supplies only!
1 - 10