Fast & Fluid Management GA350, Руководство пользователя

Страница: 25 / 30

Troubleshooting GA350 V. 1.0
25
5 Troubleshooting
5.1 General troubleshooting procedure
1. Try to solve the problem with the information in this manual.
See § 5.3.1 .
2. If it is not possible to solve the problem with the information in
this manual, contact service. See § 5.2 .
5.2 Contact service
1. Find the type plate on the rear of the machine. See § 3.1.3 or
§ 3.1.4 .
2. Take a note of the model number and the serial number of the
machine.
3. Contact your supplier or manufacturer.
See www.fast-fluid.com .
5.3 Troubleshooting guide
5.3.1 Errors
5.4 Reset after an emergency stop
1. Unlock the emergency stop.
2. Push any key.
When the machine is operational, the display
shows ‘rdY’.
Problem Possible cause Possible solution
The display shows ‘E01’ The door is open. Close the door.
The display shows ‘E08’
Emergency stop is pressed during
running state.
Release the emergency stop. See § 5.4 .
The display shows ‘E40’ Cradle not in home position.
Release the emergency stop. See § 5.4 .
Press any key to put cradle in home
position.
The display shows ‘E50’ to
‘E99’
Inverter is in error mode.
Reset the machine. See § 5.4 .
When the problem persists, contact
service. See
§ 5.2 .
WARNING
Make sure that the problem is solved before you
reset the emergency stop.