Fast & Fluid Management GA350, Руководство пользователя

Страница: 19 / 30

Operator manual GA350 V. 1.0
19
3.2.11 Adjust default mix time
1. At the same time, push the Program key and the T1, T2 or T3
key. Hold for 2 seconds.
2. Push the + or - key to adjust the mix time for T1, T2 or T3.
3. To save the new mix time, push the E-key.
4. If you do not want to save the new mix time, push the Stop
key.
3.3 General cleaning: after every operation
1. Clean the machine with a cloth and remove all spilled paint or
other liquid.
3.4 Periodic maintenance: weekly
1. Remove the paint. Refer to § 3.6 .
2. Grease the spindles.
3.5 Periodic maintenance: monthly
1. Remove paint and dirty grease. Add new grease.
2. Grease the axle and other sliding parts.
Note
You can adjust the default mix time when the
display shows ‘rdY’.
CAUTION
Do not use cleaning agents based on organic
solvents to clean painted or plastic parts of the
machine.
CAUTION
Do not use cleaning agents based on organic
solvents to clean painted or plastic parts of the
machine.
WARNING
Check the MSDS of the Colorants about
personal protection measures required for
handling the colorant.
CAUTION
Do not use cleaning agents based on organic
solvents to clean painted or plastic parts of the
machine.