Fast & Fluid Management GA350, Руководство пользователя

Страница: 13 / 30

Operator manual GA350 V. 1.0
13
3.2 Operation
3.2.1 Turning on the machine - if cradle is in correct position
1. Connect the power cable to the grounded wall socket.
2. Make sure that the emergency stop is released.
3. Set the Main switch to ‘ON’.
When the machine is on, you
hear two ‘beeps’ and the display shows ‘rdY’.
4. Press any key. The machine is operational, the display shows
‘rdY’.
3.2.2 Turning on the machine - if cradle is not in correct position
1. Connect the power cable to the grouned wall socket.
2. Make sure that the emergency stop is released.
3. Set the Main switch to ‘ON’.
When the machine is on, you
hear two ‘beeps’ and the display shows ‘...’.
4. Press any key. When the machine is operational, the display
shows ‘rdY’.
3.2.3 Turning on the machine when the machine is in hybernation
When the machine is in hybernation, the display shows ‘.’
1. Push the Stop key. When the machine is operational, the
display shows ‘rdY’.
2. Or immediately choose the correct speed and time key to start
the machine.
3.2.4 Normal mix procedure
1. Place the can. See § 3.2.5 .
2. Clamp the can.
3. Choose the requested mix speed and time. See
§ 3.2.9 and
§ 3.2.10 .
4. Start the machine, See § 3.2.6 .
5. Wait till you hear "beep".
6. Remove the can. See
§ 3.2.7 .
WARNING
Only push the emergency stop in the case of a safety emergency.
CAUTION
Make sure that the machine is empty or that a can is clamped.