Fasep RGU300.ECO, Инструкция пользователя

Страница: 8 / 21

10
Problems Causes Remedies
- If you have problems while thegear
box head is going up and down.
- If you have problems during the
locking head movements.
- If you have problems during the
movements of tyre changer table.
- The pressure valve may be blocked.
( Figure 14 / Valve 1 )
- The pressure valve may be blocked.
( Figure 14/ Valve2 )
- The pressure valve may be blocked.
( Figure 14 / Valve 3 )
- Open the valve cover and by using
pim of max

5 mm diameter unblock
the valve.( Figure 14 )
- The engine is working but the
locking head is not turning.
- The engine belt may be untightened. - Check the engine belt.
- There is not enough pressure in the
hydraulic unit
- The direction of the hydraulic unit may
be reverse.
- There may be lack of oil in the
hydraulic unit.
- Change the cables vice in the
connection.
- Put oil till the level of the insdicator.
- The locking head is not working. - The o-rings of the locking valve may be
damaged.
- The enter o-ring may be damaged.
- Change the o-rings.
- Call our technical service.
- The locking head is not turnig to the
right or left
- The gear box body is not moving up
and down.
- Tyre carriying table is not moving.
- There may be a problem with the
electrical connections.
- Call our technical service.
LOCATION
SAFE DISTANCE:
For the safe and ergonomic use of the
machine it is advisable to locate it so
as to allow work, in conditions of
complete safety.
When the machıne workıng or the
machıne stopped, anybody except the
operator doesn’t apporoach to the
machıne and the each sıdes of the
machıne must be empty at least 1,5 m.
Problems , Causes , Remedies
1– Gearbox Up Down Valve
3
– Changer Table Valve
Fig.14
2 – The Locking Head
Fig.13
CLAUSE 8