Fasep RASE.3030, Инструкция по эксплуатации

Страница: 8 / 60

8 User manual
HOISTING/HANDLING
In order to remove the machine from the pallet, hook it up as shown in fig. 2.
This hoisting point must be used whenever you need to change the installation position of the ma-
chine. Do not attempt to move the machine until it has been disconnected from the electricity and
compressed air supply systems.
INSTALLATION CLEARANCES
WARNING
The installation site must be chosen in strict compliance with the relevant regulations regarding
Safety in the workplace.
IMPORTANT: for correct, safe use of the equipment, users must ensure a lighting level of at least
300 lux in the place of use.
CAUTION
The installation of the machine must be performed in a dry area which must be protected
from adverse weather conditions.
Install the tyre changer in the chosen work position, complying with the minimum clearances shown
in fig. 3, adjust the height of the bead breaking support foot so that the machine is correctly posi-
tioned on the flooring.
Place the machine so that the plug-socket combination is easily accessible.
The machine must be placed on a horizontal surface, preferably concrete or tiled floor. Do not install
on unstable or damaged surfaces.
The surface on which the machine rests must withstand the loads transmitted during operation. The
surface must have a load-carrying capacity of at least 500 kg/m2.
Ambient working conditions
- Relative humidity 50% (temp. 40°C) ÷ 90% (temp. 20°C) without condensation.
- Temperature 5°C ÷ 40°C.
1
1
5
6
7
3
4
1a