Fasep RASE.3030, Инструкция по эксплуатации

Страница: 7 / 60

User Manual 7
TRANSPORT, STORAGE AND HANDLING
Conditions for transporting the machine
The tyre changer must be transported in its original packing and stowed in the position shown on
the external packing.
- Packing dimensions:
• width ..............................................................................................................................1543 mm
• depth ............................................................................................................................. 1140 mm
• height .............................................................................................................................1900 mm
- Weight of the machine with wooden packing:
• ........................................................................................................................................... kg 560
Ambient conditions for machine transport and storage
Temperature: -25° ÷ +55°C.
WARNING
Do not stack other goods on top of the packing to avoid damaging it.
Handling
To move the packing, insert the tines of a fork-lift truck into the slots on the base of the packing itself
(pallet) (1-fig. 1).
ATTENTION
Carry out the moving operations with great care, paying attention to move the packaged machine
only from the side clearly indicated on the packaging.
Failure to follow these recommendations may result in damage to the machine and put the operator’s
safety at risk.
Before moving the machine, refer to the HOISTING/HANDLING section.
UNPACKING/ASSEMBLY
WARNING
Take utmost care when unpacking, assembling, hoisting and installing the machine as described
in this heading.
Keep the original packing in good conditions to be used if the equipment has to be shipped in the future.
Failure to comply with these instruction may damage the machine and risk the operator’s safety.
Remove the upper part of the packing.
The machine is fully assembled, comprising 3 main groups: 2- tyre changer, 3- accessories,4 wheel
lift (fig. 1a).
Identify the points 5, 6 and 7 at which the machine is anchored to the pallet and proceed to remove
fixing devices ( fig. 1a ).