Fasep RASE.3030, Инструкция по эксплуатации

Страница: 34 / 60

34 User manual
5 • Upper bead breaking (fig. 18)
- Preload the bead breaker disc using control 21 (a tyre crushing preload of about 5 mm is advisable).
- Activate disc penetration (control 25) and then start wheel spinning (pedal control 15), while pro-
gressively lowering down the bead breaker disc (control 21).
- Perform at least one complete rotation to fully break the bead. The rim bead should be greased
during the spin.
- Return the upper arm upwards over the wheel using the control valve 21.
6 • Lower bead breaking (fig. 19)
- Preload the bead breaker disc using control 23 (a tyre crushing preload of about 5 mm is advisable).
- Activate disc penetration (control 26) and then start wheel spinning (pedal control 15), while pro-
gressively lifting up the bead breaker disc (control 23).
- Perform at least one complete rotation to fully break the bead. The rim bead should be greased
during the spin.
- Return the lower arm downwards below the wheel using the control valve 23.
7 • Tool positioning (fig. 20)
- Press the pedal 13 to move the column into its working position. Press the locking button into
18
19
A
C
B