Fasep RASE.3030, Инструкция по эксплуатации

Страница: 33 / 60

User Manual 33
- Move the bead breaking unit from the its rest to its operating position
- Move the disc towards the rim:
a) the horizontal movement is achieved by hand moving the control lever 38 or pneumatically
operating on the control valve 31;
b) the vertical movement is achieved by
operating on the control valve 21.
- Once the desired distance is reached (a gap of 2-3 mm should be left between the edge of the rim
and the bead breaker disc), operate on the control valve 24 to lock any horizontal movement of
the arm.
NB: SIMULTANEOUS LOCKING OF BOTH ARMS IS ACHIEVED OPERATING ON THIS CONTROL.
THEREFORE, THE LOWER ARM IS READY FOR BEAD BREAKING, AND THIS POSITION WILL
BE STORED IN THE MACHINE MEMORY UNTIL CONTROL 24 IS UNLOCKED.
17
17a
2-3mm
2-3mm
21
38
31
24